Study: My Understanding of Products

How Does a Beer Keg Tap Work?

We can always find beer kegs during parties or picnics with our family and friends. Thirsty people need to drink a lot so the keg is really cost effective and could save money. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. You would see people doing this but it is not as easy as it looks.

In order to get beer from the keg, you need to control the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. When pressure is released, it pushes the beer up and into the glass. Keg taps work like switches which you can put on or off or it can also be an open-close switch.

You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. Foam build up is the result of too much movement when the keg is being transported. When you have placed the keg where you plan to serve beer, let it stay for a while, because this will help to minimize the foam. You should remove the cap or seal since it is harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. If you will do it, you need to play it safe.

With a portable keg system, you tap with CO2. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. Here, the keg and the tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.

A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. An on and off valve is used in a traditional keg. This traditional keg does not need air pressure since it works using gravity. The traditional keg valve simply needs to be opened or closed to get your beer.